12 Color /Set Hot Holographic Foil by Laser Printer and Laminator Toner Reactive

Description

EASY DIY Foil with a Laminator and Laser Printer
Step 1: Print your patterns on regular paper or card stock with your laser printer;
Step 2: Next, roll out your toner-reactive foil over your paper, shiny side up. Make sure it covers all of the black ink on your paper;
Step 3: Trim the foil so that it fits perfectly over the sheet of paper;
Step 4: Place a piece of card stock over the top of the foil to hold the metallic foil in place;
Step 5: Now that you have sandwiched your foil between the two pieces of paper, run it through your laminator. Sometimes you need to do this twice or three times just to make sure the foil reacts to the toner as well as you want it to;
(TIP: Make sure your laminator is warmed up properly before use. )
Step 6: Your foil will be attached to the bottom sheet of paper. Peel it off slowly.
Size
:
5mx19.3 cm
Feature
: Foil by Laser Printer and Laminator
Not suitable for Hot Foil Pen and Hot Foil Machines
Contains 12 colors: laser silver, laser gold, light gold, sub-gold, black, rose gold, gold, silver, pink, red, blue, and slant
Products Show: