Makita-HR5212C 2 in. AVT Rotary Hammer, Accepts SDS-MAX Bits ...

Description

Drill bolt holes, bore through-holes, tie down anchor bolts and break up masonry with the Makita 2-Inch Advanced AVT Rotary Hammer, Accepts SDS-MAX Bits with 2-inch drilling capacity. The rotary hammer's 15-Amp motor puts out up to 14 foot-pounds of impact at between 1,100 and 2,250 bpm with its variable-speed controls. Soft-start technology and electronic speed control maintain consistent power. The Makita 2-inch Advanced AVT rotary hammer operates in either hammer-drill mode or in hammer mode, with a lock-on trigger that gives you full handle grip. Hammer-drill mode has a sequential timing mechanism that speeds up drilling time. An integrated depth rod prevents over-drilling. A torque-limiting clutch disengages the gears if a drill bit binds, and the motor idles down automatically, extending gear and motor life. The Makita electric rotary hammer's Advanced AVT technology greatly reduces tool vibration with a three-stage system of internal counterweights, Makita 2-inch Advanced AVT rotary hammer comes with a depth rod, D-handle, and straight handle Also includes hammer-bit grease, oil-wiping cloth and assembly and accessory case Accepts SDX-Max bits for 2-inch drilling 15-Amp motor delivers 14 foot-pounds of impact from 1,100 to 2,250 bpm Variable speed control matches the tool with the task Soft-start technology prevents bit-walking
Electronic speed control applies more power under load
Makita electric rotary hammer operates in hammer-only or hammer-drill mode
Hammer-only mode operates with trigger lock
Sequential impact timing speeds up drilling time