SDS MAX adapter 4 core bits with guide fits bosch, hilti, Milwaukee hammer drill

Description

Core Bit Adapter 5/8"-11 Threaded Male to SDS Max Male With Center Guide
Takes a standard 10'' length dry core bit with  5/8''-11 thread and converts for use on SDS Max Rotary Hammer drills
Guide is 12'' long
Easily start a hole with no push back or bouncing to protect core bit segments and drill motor
Quality adapter is made from heavy steel
Easily convert 5/8”-11 female arbor to SDS MAX male
Perfect accessory for your SDS MAX hammer drill
Center guide manufactured with zinc and cobalt
INSTRUCTIONS FOR CENTER GUIDE USE:
(1) ATTACH CENTER GUIDE TO ADAPTER BY PUSHING IT INTO HOLE. TAP IT IN. THE HEAT EXPANDS THE METAL IN THE CENTER GUIDE AND WILL HOLD IN PLACE TO START HOLE
(2) THREAD ON TO DRILL
(3) SCREW DRY CORE BIT OVER ADAPTER
(4) PENETRATE MATERIAL ABOUT 3/4" TO 1 ½” (PASS THE LASER WELDED SEGMENTS)
(5) REMOVE TWIST BIT (WILL COME OUT WITH PLIERS, MONKEY WRENCH OR SCREW DRIVER INSIDE ADAPTER HOLE)
(6) CONTINUE DRILLING USING THE BARREL AS NEW GUIDE,
DO NOT CORE WITH CENTER GUIDE IN BARREL.